The short answer
A box spring is a fixed platform. Our movable slat system is not. Each slat is three pieces of solid Aspen laminated together, and the slats rest on natural latex strips inside a solid wood frame. When you lie down, heavier areas like your shoulders and hips press the slats a little deeper, while your waist and lower back stay supported instead of hanging in a gap. Roll onto your side and the slats shift with your new shape. That is why the frame and slats replace the box spring completely: the base is the support system, not just something to hold the mattress up.
- Replaces the box spring
- Solid Aspen slats on natural latex
- Two independent sides on Queen & King
- No metal in the sleeping system
- Made in Canada by a family shop
Box spring vs our movable slat system, at a glance
| Typical box spring | Our movable slat system | |
|---|---|---|
| What it is | A fixed base under the mattress (or a solid platform). | Wooden slats resting on natural latex strips inside a solid wood frame. |
| Under your body | Stays flat and rigid, so your body has to conform to the surface. | Slats press down where you’re heavier and stay higher where you need support. |
| When you move | Nothing changes underneath you. | Slats shift with your new shape when you roll from your back to your side. |
| Over time | If the mattress sags in the middle, hips sink and the lower back loses support. | Solid Aspen was chosen because it returns toward its original shape when the load comes off. |
| Two sleepers | One shared base. | Two independent slat units on Queen and King (and Double XL with the two-slat option). |
| Materials | Varies by brand. | Solid wood, natural latex strips and fabric sleeves. No metal in the sleeping system. |
How the movable slat system works under you
When you lie down, the wooden slats press into the latex strips under them. The movement stays local: the slats under the pressure (and their immediate neighbours) drop, and the rest stay level.
Press a square block onto the slats and they go down evenly. Press a round ball and they step down in a curve that follows its shape. When the weight lifts, they spring straight back, with no slow foam-style recovery.
That independent movement is why this base is not a box spring with wood on top. It is the support system.
Watch the slats adjust to different shapes and pressure.
What the movable slat system is made of
Each slat is three pieces of solid Aspen, laminated for strength. Aspen was chosen because it returns toward its original shape when the load comes off, instead of staying bent. Each support line has three parts:



Because the slats sit on latex instead of a hard rail, they adjust to your shape with less force than a bare wood slat that can only bend.
Two people, two slat units
On Queen and King sizes (and Double XL with the two-slat option), the bed has two independent movable slat units in one frame. Each sleeper gets their own support path.
That matters when partners differ in weight or shape. It also means that when one person gets up at night, the other usually feels less of that movement than on many conventional mattress-and-box-spring setups.
Where the slats sit in the full bed
The movable slat system is one layer of a complete natural sleep system, from the floor up:
- Solid wood frame in Soft Maple, Aspen, Black Cherry or Southern Yellow Pine
- Movable slat system (this page)
- Natural VitaTalalay latex mattress
- Untreated Swiss sheep wool overlay
- Organic cotton cover
The sleeping system is built without metal. Choosing between latex and memory foam for the mattress layer? See our latex vs memory foam page.
The first nights
Many people need a short adjustment period, often about 1 to 10 nights, depending on age and how their back has been. The slats begin supporting areas that a sagging or too-rigid bed may not have held well, so some discomfort during that window can happen. It usually settles as your body adapts.
Our beds are not a cure for back pain. Day-to-day notes (sheet fit, wool care, and what normal slat shift looks like in the morning) are on our Setup & Care page.
What owners say
★★★★★ 5.0 · 43 Google reviews →“We have 2 of the queen bed systems and love that the movement doesn’t transfer to wake the other person with the two sided slat system.”
★★★★★ Jacquelyn Van Zile · Google review
“Even when we first got the bed home… it was not very comfortable at first. It took a few days to a week for our bodies to adjust to the bed.”
★★★★★ George K · Google review
Is this the right base for you?
It’s a good fit if you want:
- a wood-and-latex foundation instead of a box spring
- a bed where the base is meant to follow your body
- less disturbance between two sleepers than a typical shared foam or spring mattress
- a Canadian family workshop build: Swiss design roots, German craft approach, made in Canada
Frequently asked questions
Do I still need a box spring or a platform?
No. The solid wood frame and movable slat system are the base. The slats rest on natural latex strips, so they press down and follow your shape instead of holding one flat surface all night.
What are the slats made of?
Each slat is three pieces of solid Aspen, laminated for strength. The slats rest on natural latex strips in fabric sleeves on a solid wood rail, inside a solid wood frame.
Can two people with different weights share the bed?
Yes. On Queen and King (and Double XL with the two-slat option), two independent slat units sit side by side, so each sleeper gets their own support and feels less of the other’s movement.
Is there any metal in the base?
No. The sleeping system is built without metal. The frame, slats, latex mattress and wool contain none, and the frame is joined with our own connection system instead of metal hardware.
Will it take time to get used to?
Often, yes. Many people need about 1 to 10 nights while their body gets used to the new support. A little discomfort in that window can happen, and it usually settles as you adapt. This is support and design, not a medical treatment.
What sizes do you make, and can I change the height?
We build Twin XL, Double XL (with one or two slat systems), Queen, King and California King. The standard height is 20.5″ (about 52 cm) from the floor to the top of the mattress, and we can build it taller or lower to suit you. If you need a size that isn’t listed, ask us about a custom build.
How long does it take, and how is it shipped?
Every bed is made to order, so please allow 2 weeks for the standard bed, or 3 weeks with headboard add-on, in our New Brunswick workshop, plus shipping. The bed ships as individual components, which makes it easier to bring through narrow doorways and up tight stairs, and setup is straightforward.
Request a price list for your area
We don’t post prices online because they depend on where you live, so we send you the price list for your area. Tell us the size and wood you’re considering, and we’ll answer anything still unclear about how the slats work.
Every bed is made to order in our New Brunswick workshop: please allow 2 weeks for the standard bed, or 3 weeks with headboard add-on, plus shipping. It ships as individual components, so it goes through narrow doorways and up tight stairs more easily.
Fill in the short form below and we’ll reply personally.
© All Rights Reserved.